For your wash system you can use the water from your on board pressure supply. You only need a solenoid valve. As soon as the valve gets a signal via the wiper control, it will open to provide water for the wipe/wash program.

For your wash system you can use the water from your on board pressure supply. You only need a solenoid valve. As soon as the valve gets a signal via the wiper control, it will open to provide water for the wipe/wash program.

Nr. 2180 Manufacturer item code 00

Nr. 2181 Manufacturer item code 00

Angle bulkhead coupling suitable for rubber pipe – compression fitting Nr. 2150 Inner diam. mm 6 Suitable for Low pressure Brand Exalto Model / type Washing system component Kind Fittings non-pressurized systems Manufacturer item code 1A101T40PP

Bulkhead fitting suitable for HD pipe – snap in Nr. 2130 Inner diam. mm 6 Suitable for High pressure Brand Exalto Model / type Washing system component Kind Fittings pressurized systems Manufacturer item code PM1206E

Angle bulkhead coupling suitable for rubber pipe – compression fitting Nr. 2117 Connections B.S.P. x Ø mm 1/4 B.S.P. x 6 Suitable for Low pressure Brand Exalto Model / type Washing system component Kind Fittings non-pressurized systems Manufacturer item code 1A0100.31-401200b1

Straight male stud coupling – snap in fittin Nr. 2119 Connections B.S.P. x Ø mm 1/4 B.S.P. x 6 Suitable for High pressure Brand Exalto Model / type Washing system component Kind Fittings pressurized systems Manufacturer item code (R)PM010612E

Angle bulkhead coupling suitable for rubber pipe – compression fitting Nr. 2116 Connections B.S.P. x Ø mm 1/8 B.S.P. x 6 Suitable for Low pressure Brand Exalto Model / type Washing system component Kind Fittings non-pressurized systems Manufacturer item code 1A0100.31-401000b1

Straight male stud coupling – snap in fittin Nr. 2118 Connections B.S.P. x Ø mm 1/8 B.S.P. x 6 Suitable for High pressure Brand Exalto Model / type Washing system component Kind Fittings pressurized systems Manufacturer item code PM010611E

This self-parking Exalto MD1 wiper is suitable for bulkhead mounting. This wiper is available in 12 and 24V. All moving parts are protected by an aluminium housing. With a torque of 23 Nm, this wiper can handle arms up to 750 mm in length and blades up to 750 mm. The motor is insulated earth […]

These switches are micro-controller based “intelligent” switches for operating one or two Exalto wiper motors. The switches consist of touch pads with a 45 cm connection cable. The switches offer two continuous speeds, three step intermittent, perfect self-parking due to dynamic break and a wipe/wash program. LEDs on the switch indicate the selected mode, speed […]